## Learning Outcomes

This article explains how goodwill arises under the acquisition method in business combinations and clarifies its treatment for CFA Level 2 candidates. It details the steps for measuring identifiable net assets, determining consideration transferred, and deriving goodwill when the acquirer obtains a controlling interest, including situations with less than 100% ownership. The discussion distinguishes clearly between the full and partial goodwill methods, shows how to calculate each, and explains how non-controlling interests are measured under both approaches. It analyzes how the choice of goodwill method affects reported assets, equity, non-controlling interests, and key profitability ratios such as ROA and ROE, enabling precise interpretation of consolidated financial statements. The article also examines goodwill impairment testing under IFRS and US GAAP, highlighting the allocation of goodwill to cash-generating units or reporting units, the current one-step testing frameworks, and the conditions that trigger impairment recognition. Worked numerical examples illustrate the mechanics of goodwill calculation and impairment loss measurement, while exam-focused commentary emphasizes common traps, terminology, and disclosure implications that are likely to be tested.

## CFA Level 2 Syllabus

For the CFA Level 2 exam, you are expected to understand the accounting and analytical implications of goodwill for business combinations, with a focus on the following syllabus points:

- Calculating acquisition date goodwill using both full and partial goodwill approaches
- Explaining and comparing the IFRS and US GAAP impairment testing procedures for goodwill
- Determining the balance sheet and income statement impact of goodwill recognition and impairment
- Assessing how different goodwill methods affect reported equity, assets, ROE, and ROA ratios

## Test Your Knowledge

_Attempt these questions before reading this article. If you find some difficult or cannot remember the answers, look more closely at that area during your revision._

1. Under the acquisition method, how is goodwill calculated when less than 100% of a subsidiary is acquired?
2. Which impairment approach does US GAAP require for goodwill?
   a) One-step method
   b) Two-step method
3. True or false? Partial goodwill results in lower reported assets and equity than the full goodwill method.
4. Briefly state when a goodwill impairment loss is recognized under IFRS.

## Introduction

Business combinations often result in the recognition of goodwill on the acquirer's balance sheet. For the CFA exam, you must understand how goodwill is calculated under both full and partial goodwill methods, as well as the procedures and implications of subsequent impairment testing. These details affect consolidated financial statements, ratios, and interpretation of acquisition performance. This article provides a concise guide to goodwill under the acquisition method, addressing both calculation and impairment.

> **Key Term: goodwill**
> The excess of the purchase price over the fair value of identifiable net assets acquired in a business combination, representing future economic benefits not individually identified or separately recognized.
>
> **Test Tip:**
> When revising Acquisition method goodwill and impairments, connect each definition, method, or rule to the kind of question the assessment is likely to ask.

### GOODWILL UNDER THE ACQUISITION METHOD

### Calculation of Goodwill

When acquiring control of a subsidiary (usually >50% ownership), the acquirer applies the acquisition method. Goodwill is recognized as the excess of the purchase consideration plus the value of non-controlling interests (NCI) over the fair value (FV) of the subsidiary’s identifiable net assets.

There are two permitted approaches to measuring goodwill when less than 100% of the subsidiary is acquired:

- **Full goodwill method** (required by US GAAP; permitted by IFRS)
- **Partial goodwill method** (permitted by IFRS only)

> **Key Term: full goodwill**
> The difference between the fair value of the subsidiary as a whole and the fair value of its identifiable net assets, resulting in the recognition of goodwill attributable to both the controlling and non-controlling interest.
> **Key Term: partial goodwill**
> The difference between the purchase price paid and the acquirer's proportionate share of the fair value of the subsidiary’s identifiable net assets, resulting in goodwill only for the controlling interest.

### Calculations

- Full goodwill:

  $$
  \text{Full goodwill} = (\text{Fair value of subsidiary as a whole}) - (\text{Fair value of net identifiable assets})
  $$

  Where the fair value of the subsidiary as a whole is usually calculated as:

  $$
  \text{Purchase price paid} \div \text{Ownership percentage acquired}
  $$

- Partial goodwill:

  $$
  \text{Partial goodwill} = \text{Purchase price paid} - (\text{Ownership percentage acquired} \times \text{Fair value of net identifiable assets})
  $$

- Non-controlling interest (NCI):
  - Under full goodwill: measured at fair value (including goodwill)
  - Under partial goodwill: measured as proportionate share of the FV of net identifiable assets (excluding goodwill)

### Worked Example 1.1

A company acquires 75% of Target Co. for \$900,000. The fair value of Target’s identifiable net assets is \$1,000,000. The fair value of the NCI is \$280,000. Calculate goodwill under (a) the full and (b) partial goodwill methods.

> **Answer:**
> (a) **Full goodwill:**
> Full value of subsidiary = \$900,000 ÷ 75% = \$1,200,000
> Goodwill = \$1,200,000 − \$1,000,000 = \$200,000
> (b) **Partial goodwill:**
> Partial goodwill = \$900,000 − (75% × \$1,000,000) = \$900,000 − \$750,000 = \$150,000

### Impact on Financial Statements and Ratios

- Full goodwill method results in:
  - Higher goodwill reported on balance sheet
  - Higher NCI
  - Higher total assets and equity
  - Lower return on assets (ROA) and return on equity (ROE)

- Partial goodwill method results in:
  - Lower goodwill and NCI
  - Lower total assets and equity
  - Higher ROA and ROE (due to smaller denominator)

### GOODWILL IMPAIRMENT TESTING

Goodwill is not amortized; it must be tested for impairment annually and whenever indicators of impairment are present.

![Goodwill measurement methods under the acquisition method, comparing full and partial goodwill effects on noncontrolling interest, assets, equity, ROA, and ROE.](https://static.pastpaperhero.com/images/cfa-level2-intercorporate-investments-and-combinations-acquisition-method-goodwill-and-impairments_00.png)

_Full and partial goodwill approaches differ in noncontrolling interest measurement and produce opposite effects on reported assets, equity, ROA, and ROE._

### Impairment under IFRS

- Goodwill is allocated to cash-generating units (CGUs) expected to benefit from the combination.
- Impairment test (one-step approach):
  - If the recoverable amount of the CGU is less than its carrying amount (including goodwill), an impairment loss is recognized.
  - The loss is allocated first to reduce goodwill, then pro rata to other assets in the CGU.

### Impairment under US GAAP

- Goodwill is allocated to reporting units.
- Impairment test (ASU 2017-04, current standard):
  - One-step approach: If the carrying amount of the reporting unit exceeds its fair value, the difference is recognized as a goodwill impairment loss (limited to the amount of goodwill allocated to the reporting unit).

- Previously, GAAP used a two-step process, but this has been replaced by the simpler test above.

> **Key Term: impairment (goodwill)**
> The write-down of goodwill on the acquirer’s balance sheet when its recoverable amount (IFRS) or fair value (GAAP) falls below its carrying value.

### Worked Example 1.2

ReMajor records \$300,000 of goodwill from an acquisition. At year-end, the reporting unit’s carrying value (including goodwill) is \$1,800,000; the recoverable amount (IFRS) or fair value (GAAP) is assessed at \$1,730,000. What is the impairment loss recorded?

> **Answer:**
> Impairment loss = Carrying amount − recoverable (or fair) value
> = \$1,800,000 − \$1,730,000 = \$70,000
> The carrying amount of goodwill is reduced by \$70,000, loss recognized in the income statement.
>
> **Exam Warning:**
> Under IFRS, the impairment test may apply to groups of assets (cash-generating units), whereas US GAAP tests are done at the reporting unit level. On the exam, pay attention to whether the question is referencing a CGU (IFRS) or reporting unit (GAAP).

## Summary

- Goodwill arises under the acquisition method when the purchase price and (for full goodwill) the fair value of NCI exceed the fair value of identifiable net assets.
- Full goodwill (GAAP, optional under IFRS) recognizes additional goodwill attributable to non-controlling interests, resulting in higher reported assets and equity,
  while partial goodwill (IFRS option) recognizes only the acquirer's share.
- Goodwill is not amortized but must be tested annually for impairment. Impairments reduce goodwill and affect net income.
- IFRS and US GAAP differ in the level and method for impairment testing.

## Key Point Checklist

_This article has covered the following key knowledge points:_

- Differences between full and partial goodwill calculation under the acquisition method
- Impact of full vs partial goodwill on NCI, assets, and equity
- Goodwill impairment testing under IFRS (CGU, recoverable amount) vs US GAAP (reporting unit, fair value)
- Financial statement effects of goodwill recognition and impairment
- Importance of identifying which goodwill approach and impairment method is specified in exam questions

## Key Terms and Concepts

- goodwill
- full goodwill
- partial goodwill
- impairment (goodwill)


Intercorporate investments and combinations - Acquisition method goodwill and impairments