## Introduction

A material term is a provision so important to a contract that, without it, the parties would not have agreed to the deal. These terms set the core deal points—what is being exchanged, on what timeline, and under what conditions. When a contract leaves out a material term or states it too vaguely, it can be hard to enforce. US courts look for clear agreement on these key items, and some laws, like the Uniform Commercial Code (UCC) for goods and state real estate rules, set special requirements.

This guide explains what counts as a material term, how courts treat missing or unclear terms, and practical steps to draft agreements that hold up.

Note: Contract law varies by state. This content offers general US guidance and is not legal advice.

## What You'll Learn

- What a material term is and why it matters for contract formation and enforcement
- How courts decide whether a term is material, definite, and enforceable
- Which terms are commonly material in sales of goods, construction, services, and real estate
- How “time is of the essence,” gap fillers, and the parol evidence rule affect disputes
- Case highlights: Hawkins v. McGee and Lucy v. Zehmer
- Practical drafting tips to avoid “agreement to agree” problems and reduce risk
- A quick-reference table with key rules and takeaways

## Core Concepts

### What Counts as a Material Term

- Definition: A material term is a key contract provision that goes to the heart of the bargain. Without agreement on that term, there is no deal.
- Objective test: Courts look at what a reasonable person would think the parties agreed to based on their words and actions, not private thoughts or jokes.
- Definiteness: If a term is too vague (“fair price,” “as soon as possible,” “to be agreed”), a court may find no contract or may read in a reasonable term only if the law allows it and the parties clearly meant to be bound.
- Statute of Frauds: Certain contracts must be in writing and signed, with essential terms stated. These include contracts for the sale of land and many sales of goods for \$500 or more (UCC §2-201).
- Parol evidence rule: When a written agreement is intended as the final version, outside statements generally cannot add new material terms. They can sometimes explain ambiguous wording.

### Material Terms by Contract Type

- Goods (UCC Article 2)
  - Usually material: Quantity, price or a way to set price, delivery terms, payment terms.
  - Gap fillers: The UCC can supply a “reasonable” price (UCC §2-305), time (UCC §2-309), and place of delivery (UCC §2-308) if the parties intended to be bound. Quantity is harder to fill; requirements/output contracts (UCC §2-306) can satisfy it.
- Real estate
  - Typically material: Property description, purchase price, parties, and often the closing date and financing terms. Most states require these terms in a signed writing.
- Construction
  - Typically material: Scope of work and specs, price or rate (including change orders), completion milestones, final completion date, and payment schedule. A “time is of the essence” clause can make deadlines especially important.
- Services and employment
  - Typically material: Scope of services or job duties, compensation (rate, salary, bonus criteria), term/termination, deliverables, and ownership of work product (IP). Confidentiality and non-compete terms may be important but enforceability varies by state.

### Missing or Vague Terms: What Courts Do

- Agreements to agree: If a core term is left “to be agreed later” with no method to decide it, courts often find no contract.
- Gap filling under the UCC: If the parties clearly meant to be bound in a sale of goods, the UCC can supply reasonable terms for price, time, and delivery. Quantity usually cannot be created by a gap filler unless the contract is a valid requirements/output contract.
- Time and deadlines: Without a “time is of the essence” clause, a moderate delay may not be a material breach. With that clause, missing a deadline can be a serious breach with immediate remedies.
- Course of performance/dealing: For goods, how the parties have behaved in past transactions or within the current deal can help interpret vague terms.
- Remedies and material breach: Failing to perform a material term can allow the other party to suspend performance, terminate (if allowed), and seek damages or, in some cases, specific performance.

## Key Examples or Case Studies

- Price in a sales contract
  - Why it matters: Price often sits at the center of the bargain. If price is missing or unclear, the contract may be challenged for indefiniteness.
  - US twist: Under UCC §2-305, a sales contract for goods can still be valid without a fixed price if the parties intended to be bound and the price can be set as a “reasonable price at the time of delivery.” In services and real estate deals, a definite price is more commonly required.
- Delivery date in a construction contract
  - Why it matters: Completion dates affect financing, occupancy, and penalties. If timing is important, say so in a “time is of the essence” clause and tie it to remedies, such as liquidated damages or termination after a cure period.

Cases involving material terms

- Hawkins v. McGee (N.H. 1929)
  - What happened: A surgeon promised a “100% good hand.” The result was worse than before the operation.
  - Why it’s important here: The specific promise was treated as a term, not mere puffery. The doctor’s failure to meet that promise was a breach, and the court measured damages by the difference between the promised hand and the result.
  - Takeaway: Clear promises about results can be treated as material contract terms, especially when the wording is concrete and induces agreement.
- Lucy v. Zehmer (Va. 1954)
  - What happened: Parties signed a written agreement for the sale of land over drinks. The seller later claimed it was a joke.
  - Why it’s important here: The writing included essential terms (parties, land description, price). The court enforced the contract based on outward actions and words, not secret intent.
  - Takeaway: When essential terms are written and both parties act like they mean business, a later claim of “just kidding” won’t usually defeat enforcement.

## Practical Applications

- Identify the material terms before drafting
  - List the deal’s must-haves: subject matter, scope/quantity, price and payment timing, delivery or performance schedule, acceptance criteria, and end date or completion.
  - Confirm whether the Statute of Frauds applies. If it does, put the essential terms in a signed writing.
- Make terms specific and measurable
  - Define deliverables with specs or statements of work. Attach exhibits for drawings, part numbers, service levels, or milestone charts.
  - Avoid “TBD,” “reasonable,” and “as needed” without context. If you must leave something open, specify the method to set it (e.g., “price set by third-party index” or “mutual written change order using Exhibit C rates”).
- Set timing and consequences
  - If timing truly matters, add “time is of the essence” and tie it to clear remedies (liquidated damages, credits, or termination rights after a cure period).
  - Use milestone billing tied to completion criteria to reduce disputes.
- Clarify price and payment
  - Spell out total price or rate, taxes, expenses, deposits, retainage, invoice timing, and late fees. For goods, address shipping terms (FOB, risk of loss) and delivery windows.
- Allocate quality and risk
  - State warranties and acceptance testing. Add limits of liability and indemnity where appropriate and permitted by state law. While not always “material” to formation, these terms drive risk and outcomes in disputes.
- Lock the document
  - Use an “entire agreement” clause so prior emails don’t add missing material terms. State the order of precedence among the agreement, exhibits, and purchase orders.
  - Confirm signatures by authorized representatives.
- Fix gaps the right way
  - If you discover a missing material term, sign a short amendment or change order. Do not rely on informal emails to supply essential terms.
  - For goods, consider whether UCC gap fillers or course of performance can solve minor ambiguities, but don’t depend on them for quantity or core scope.
- Plan for disputes
  - Add governing law, venue, and dispute resolution steps (mediation, arbitration, or court). State the remedy for material breach, including notice-and-cure periods.

## Summary Checklist

- Parties, subject matter, and scope/quantity are clearly stated
- Price and payment terms are complete (rates, taxes, invoices, due dates)
- Delivery/performance schedule is specific; add “time is of the essence” if deadlines are critical
- Acceptance criteria and quality standards are defined
- Term and termination rights, including cure periods, are stated
- For goods: shipping terms, risk of loss, and any UCC gap fillers you expect to rely on are addressed
- For real estate: property description, price, and closing details are in a signed writing
- Change process (amendments or change orders) is clear
- “Entire agreement” and order-of-precedence clauses are included
- Signatures by authorized representatives are obtained

## Quick Reference

| Topic                  | Rule/Source                 | Practical takeaway                                    |
| ---------------------- | --------------------------- | ----------------------------------------------------- |
| Material term          | Common law                  | A key deal point; without agreement, no contract      |
| Open price for goods   | UCC §2-305                  | Contract may stand; court supplies a reasonable price |
| Quantity for goods     | UCC §§2-201, 2-306          | Quantity is usually required; requirements/output OK  |
| Time is of the essence | Contract clause             | Makes deadlines material; late performance is serious |
| Statute of Frauds      | UCC §2-201; real estate law | Certain deals need a signed writing with essentials   |

Material Terms in Contracts: Definitions, Cases, and Practical Tips